Products' info |
|
Application |
|
FAST GB 1 owing to its characteristic features can be perfectly used for laying cellural concrete blocks and making walls of them. |
|
Characteristics |
|
FAST GB 1 is a water- and frost-resistant thin-coat cement-polymer mortar, easy to glue all elements made of cellural concrete, characteristic for its great adhering properties. |
|
Preparation of the base |
|
FAST GB 1 must be applied on even, clean and ground surfaces of cellural concrete blocks. |
|
Instructions |
|
Pour into a container approximately 5,0 litres of water for 25 kg of dry substance, pour in the contents of the bag stirring simultaneously until an even paste consistence is reached- without any pellets (it is recommended to use a slow-running drill). Leave for about 5 minutes and stir again before applying. The adhesive prepared in this way can be used up within the following 2 hours.
The mortar should be applied onto a block with plain-edge or toothed-edge trowel and correct immediately in the right position. Correction time is up to 10 minutes. After applying the mortar the block should be hammered with a rubber hammer. The excess of the mortar must be delicately removed with a trowel (do not smear over the lateral surface of the gas concrete).
|
|
Efficiency |
|
With the thickness of the glued parts of 2,5 mm we can obtain from a bag of 25 kg the following parameters:
block thickness 12 cm - appr. 7,20 m2
block thickness 24 cm - appr. 3,60 m2
block thickness 36 cm - appr. 2,40 m2
|
|
Storage |
|
Store in a manufacture (originally) closed packages in a dry room on pallets at the temperature of +5oC up to 25oC.
Suitability for use: 12 months.
|
|
Technical specifications |
|
Mixture proportions |
appr. 5 l of water for 25 kg of the dry substance |
Readiness for use |
up to 2 hours |
Correction time |
appr.10 minutes |
Adherence |
min. 0,15 MPa |
Compressive strength |
min. 5MPa |
Bending strength |
min. 2MPa |
Air and base temperature |
from +5oC up to +25oC |
Min. and max. thickness of the layer |
from 2 to 10 mm |
|
|
Packages |
|
Bags of 25kg
Pallets: 1050 kg in 25 kg bags (42 bags each)
|
|
Standards / norms |
|
Manufactured according to: PN-EN-998-2:2004.
Sanitary Certificate issued by the State Sanitary Department no HK/B/0776/01/2004.
|
|
Note |
|
The range of the product use recommended and defined in these instructions does not relieve the user/contractor from the obligation of carrying out works following both building principles as well as labour safety regulations.
P.W. FAST guarantees and shall be liable for the product quality, however it cannot control methods in which the product was used and under what conditions.
|
|